Loto-lock out Tag out security check
Execution steps of locking program: Inform all may be affected employees, clearly know the source of energy, the most important step is to know about the potential energy of the machine, observe all the connection machine hole \ tube, etc., do not believe that wire and power supply has been cut off, best use instrument to measure and confirm again, and eliminate the energy to be locked, then the maintenance activities, Verify that all personnel are away from relevant machinery and equipment, and ensure that all switches are turned to the "off" position. Then connect the power supply or energy, and confirm that the machine is working normally, and inform the relevant staff that the machine has returned to normal operation.

When the work is completed, the relevant machine and equipment must be inspected and tested before the lock or Lockout Tag can be released. The inspection shall ensure that: the work has been completed; All staff have been away from the relevant machinery and equipment; All machine protection devices and employee protection devices are ready; All obstacles have been removed. Special unlock \ except Lockout Tag program: Special unlocking procedures can only be carried out with the approval of the department manager and industrial safety officer of the employee who locks the machine. The employee who performs the special unlocking procedure must be familiar with the whole LOTO procedure, verify whether the employee who locks the machine is still working in the machine and assess whether the machine and equipment is safe and suitable for use. It is a good idea to find the employee who used the lock to understand the situation. If the employee is not present, he/she should be contacted by his/her supervisor, inform the employee concerned, open the lock or unlatch, inspect and activate the equipment concerned, and prepare a special unlocking report to the security officer.