Here's another example of a lockout-tagout case: A construction company was tasked with installing a new electrical panel in an office building. Before commencing installation work, the team's lead electrician made sure they followed proper LOTO procedures to keep them safe while on the job. They first identified the switchboards that needed to be locked, and then notified all relevant personnel in the area that the equipment was being locked. They then turned off the circuit breaker powering the panel, and then confirmed that the panel and all associated wires were completely de-energized. Next, the electrician locks the switchboard using the designated locking device and affixes a tag indicating that the panel is locked. They then proceeded to install the new panels, confident that their lock-out, tag-out procedures would prevent accidental activation of the panels during work. Once the installation is complete and verified, the electrician reverses the steps to properly bring the panel back online. They removed lockouts and tags, turned circuit breakers back on, and tested the panels to make sure they were functioning properly. As a result of following LOTO procedures, the electricians were able to safely complete work on the switchboards without any serious accidents or injuries.