Preparation workshop safety production training

[Location] : Preparation workshop of a pharmaceutical factory
[Equipment] : mixing machine
[Aftermath] : One person died
[Accident process] : The mixing machine fault was repaired by the electrician. At the same time, the mixing machine suddenly started and the electrician did not stand in the safety line. As a result, he was crushed to death by the feeding mouth of the mixing machine and died.
[Cause analysis] : The electrician did not have safety awareness during maintenance and did not Lockout the switch of the machine. When the machine was being repaired, someone else suddenly started the machine, which led to the accident.
[Control measures] : Lockout tagout the switch of the equipment for energy isolation during equipment maintenance.

[Location] : Comprehensive workshop of a pharmaceutical factory
[Equipment] : Swing granulator
[Consequence] : The hand was clipped, in which the hand tendon groove is difficult to recover
[Accident process] : When the operator is running the machine, the machine has a small fault, in the case of not closing the machine to try to eliminate the hand, the result of the hand was clipped;
[Cause analysis] : First of all: workers operate in violation of rules. In the case of machine failure, they try to troubleshoot the fault without stopping the machine, resulting in hand clipping:
[Control measures] : In the production process, when the machine runs once there is a failure, we always think that in the case of not shutting down to intentionally to directly solve the failure, while ignoring the safety problem, so the operator and anyone in the machine operation do not use their hands to adjust, must turn off the power to adjust.